N05500
Share to：
N05500 typically refers to Monel alloy K-500, a precipitation-hardenable nickel-copper alloy. It can be produced in various specifications of seamless tubes, plates, bars, forgings, flanges, rings, welded pipes, strips, wires and matching welding materials.
Product name：
Hastelloy
Material：
Hastelloy B-3
Warehouse：
Tianjin
Surface treatment：
Pickled/bright/black etc.
Category：
Keyword：
N05500
Whatsapp：
Details description
Chemical Composition
Carbon C≤0.25%, Nickel Ni 63%~67%, Aluminum Al 2%~4%, Titanium Ti 0.25%~1.00%, Iron Fe≤2.0%, Manganese Mn≤1.5%, Silicon Si≤1.00%, Copper Cu balance, Sulfur S≤0.01%, Magnesium Mg 0.08%~0.12%.
Mechanical Properties
Tensile strength σb≥1100MPa, Yield strength σp0.2≥792MPa, Elongation σ5≥20%.
Performance Characteristics
Good corrosion resistance: It has corrosion resistance comparable to Monel 400, excellent corrosion resistance in hydrofluoric acid and fluorine media, and good corrosion resistance to hot concentrated alkaline solutions. It is also resistant to corrosion from seawater, atmosphere, and organic compounds. However, under age-hardening conditions, it has a significant tendency for stress corrosion cracking in certain environments.
High strength and hardness: By adding aluminum and titanium and undergoing precipitation hardening treatment, its yield strength is approximately three times that of Monel 400, and its tensile strength is twice as high.
Outstanding low-temperature performance: Tensile strength and yield strength increase as the temperature decreases, while ductility and toughness are almost unaffected. Even at extremely low temperatures, no ductile-to-brittle transition occurs.
Product Forms
Various specifications of seamless pipes, steel plates, round steel bars, forgings, flanges, rings, welded pipes, steel strips, wires, and matching welding materials can be produced.
Application Fields
Mainly used for pump shafts and centrifugal impellers, conveyor scrapers, oil and gas well drill rings, tough components, valve gaskets, etc. It can also be used to manufacture turbine blades and gas turbine blades operating at temperatures below 750℃ in aero-engines, as well as fasteners and springs on ships, pump and valve components on chemical equipment, and pulp scraper blades on papermaking equipment.
Qualification certification
Corporate video
Seamless steel pipe manufacturing
3PE anti-corrosion pipe manufacturing
Spiral steel pipe manufacturing
Application fields
Petrochemicals
Petrochemicals
Aerospace
Aerospace
Energy equipment
Energy equipment
Oil/gas/water pipelines
Oil/gas/water pipelines
Building construction
Building construction
Dredging & piling works
Dredging & piling works
Related products
FAQ
How to perform daily maintenance and inspection of steel structures during use?
What preparatory work needs to be done before installing a steel structure?
What are the main differences between light steel structures and heavy steel structures?
How are the column spacing and span of steel structure factory buildings usually determined?
What changes occur in steel structures under high-temperature environments, and how can these be addressed?
What are the common structural forms of large-span steel structures?
Online consultation
We will contact you within one working day. Please check your email.
Copyright © 2025 Quan Ge Pipe Industry
Feedback